How you can Take away Paint from Concrete with Grinder (3 Steps)

Posted on

Collage of How to remove paint from concrete with grinder.

Whether or not it’s your porch, storage flooring, or different painted concrete floor, in some unspecified time in the future, chances are you’ll need to take the present paint off. Usually paint on concrete takes punishment, and the paint is broken, and a restore and repaint is critical, or you may want the naked concrete again. Both method, you should eliminate the present paint. Fortunately eradicating paint from concrete could be performed your self.

Eradicating paint from concrete is a process that you are able to do your self. Paint surfaces flake, scratch, and fade over time, and there are multiple prosses to take away it. A corded grinder, cup wheel, and a few protecting gear is the only and quickest methodology to take away paint from concrete.

 Climate and foot site visitors has an impression on any concrete-painted floor. Strolling out onto your porch and seeing the badly broken paint could be disheartening. After consulting knowledgeable, you will have thought to do it your self; properly, now you possibly can. With a couple of DIY choices accessible to take away paint from concrete, utilizing a grinder and cup wheel is the best, and listed here are a couple of easy steps to do it your self:


  • 4-inch Diamond Cup Wheel
  • Concrete paint stripper (remover)


  • Corded angle grinder
  • Angle grinder mud cowl
  • Wire brush
  • Mud masks
  • Protecting eyewear
  • Broom
  • Vacuum cleaner


Step 1. Corded Grinder and Security Put on

The muse of each DIY challenge is preparation. Understanding the precise instruments and supplies you want is crucial earlier than making an attempt to do it your self. For a DIY challenge to succeed, each facet is taken into account and put in place earlier than commencing with anything. Listed below are the steps to arrange to take away paint from concrete:

  • Put together the painted concrete floor by eradicating any free obstacles. An open floor with nothing hindering will make grinding the paint from the ground simpler and forestall any missed spots hid beneath free objects.
  • Use a corded angle grinder to take away the paint from the concrete, and relying on the painted space floor dimension, there are totally different grinder choices. Your normal 4.5-inch 5.5-amp grinder will possible be adequate for a small to regular-size floor. For giant areas renting a flooring grinder might value a bit extra however will prevent time and vitality.
  • Guarantee the facility extension is lengthy sufficient to cowl all the painted concrete space and that your grinder can attain each nook.
  • Placed on a protecting mud masks. Grinding paint from a concrete flooring creates mud, and inhaling these particles just isn’t good. An N95 or higher masks is the only option as a result of a surgical masks will not shield towards concrete mud adequately. Working with a masks is uncomfortable, however security trumps consolation each time.
  • Put on security glasses (security goggles) when grinding your painted concrete. A grinder that removes ache spins at excessive pace, and a bit of particles shot into your eye can result in irreparable injury. Be sure that the security goggles have facet safety, particularly for mud and small particles.

DIY tasks are enjoyable and may save some huge cash, however getting injured may very well be pricey and wreck the expertise. Security put on is essential with any DIY challenge, particularly as a result of the instruments and strategies are unfamiliar. Relatively secure than sorry must be each DIY challenge motto.

Step 2. Match Right Diamond Cup Wheel and Equipment

How to Remove Paint from Concrete with Grinder - Step 2. Fit Correct Diamond Cup Wheel and Accessories

Grinders have quite a lot of disks and equipment. Every disk and accent is designed for a singular objective and utilizing the flawed slicing wheel and equipment can result in damage or worse.

Eradicating paint from concrete requires a 4-inch diamond cup wheel and dirt covers specifically designed for eradicating paint from concrete. Listed below are the steps to implement the cup wheel and dustcover:

  • Match an angle grinder mud cowl. Be sure that it’s safe. The mud cowl surrounds the diamond cup wheel to stop mud from escaping. A mud cowl is a useful device, particularly while you take away paint from concrete indoors or in an enclosed space.
  • Match the 4-inch diamond cup wheel to the angle grinder. Utilizing a grinder tightening device, safe the diamond cup wheel to make sure it stays connected all through the paint elimination course of. This step is essential as a result of a free cup wheel might trigger severe injury or
  • Connect a vacuum cleaner pipe to the angle grinder mud cowl to suck up all of the mud when you are grinding the paint off the concrete flooring. The vacuum cleaner will suck up all of the paint mud and cut back your probability of inhaling mud.

If the floor the place you might be eradicating the paint from the concrete is in an open space or outdoors, utilizing a grinder with out a mud cowl must be okay.

Not utilizing a mud cowl inside is okay, however be ready for lots of sweeping and vacuuming afterward. For those who work with out a mud cowl inside, guarantee good air flow, a mud masks, and protecting eyewear.

Step 3: Grind Paint From the Concrete (Process)

How to Remove Paint from Concrete with Grinder - Step 3: Grind Paint From the Concrete (Procedure)

With the preparation accomplished and the right instruments and supplies in place, you possibly can proceed to the duty. Utilizing a corded grinder and cup wheel is the quickest and most constructive technique to take away paint from concrete however be assured that it nonetheless takes some effort and endurance. Listed below are the steps to proceed with the DIY process of eradicating paint out of your concrete:

  • Safe the grinder with each palms. Utilizing each palms when grinding paint from a concrete flooring is essential if you wish to keep away from damage. Having each palms on the grinder will even hold the grinder regular and forestall grinding inconsistently. When eradicating paint from concrete with a grinder, palms are like heads; two are higher than one.
  • The movement is as much as each individual, and there’s no one right method. Whether or not you favor to grind in a round or side-to-side movement is as much as you, though holding the identical stress and never concentrating on the identical spot is really useful to keep away from dents.
  • For those who use a grinder mud cowl, you possibly can take away the entrance finish of the quilt. The entrance of the mud cowl has a clip that removes simply. It’ll enable the diamond cup wheel to get near the partitions and corners with out the tip connected.
  • Proceed to grind ones over the paint of your concrete flooring. If there’s nonetheless paint left, go on to do it a second time. If there are nonetheless darkish spots or strains, it’s due to an uneven concrete floor or cracks. Utilizing the grinder to take away these spots or cracks will trigger deeper dents and be noticeable.
  • Upon getting eliminated the paint from the ground, take the wire brush and gently brush these dents and cracks to take away the final little bit of paint. Utilizing a concrete paint stripper for the paint left in cracks the place you battle with the wire brush may also help; observe producer directions fastidiously and put on protecting gloves.
  • The wire brush can also be splendid for these corners the place the grinder cup wheel can’t attain. Use the wire brush with care as a result of the wire brush can depart scrape marks if you happen to consider one spot too lengthy. Utilizing some paint stripper if it’s a deep crack is a useful different.
  • Lastly, it’s time to clear. Sweep the mud that escaped the grinder mud cowl and any entry particles left from the wire brush. Taking a twig bottle and evenly spraying the mud will assist keep away from mud spreading while you sweep. Preserve spray mild so it won’t develop into muddy and an even bigger cleansing job.
  • Vacuum the paint-free concrete, and you might be prepared to begin the following coat of paint or depart it pure. A family vacuum ought to work positive along with your mud cowl, however a greater different can be to hire a concrete mud vacuum. In case your associate lets you use the home vacuum, becoming a mud sock to the filter is a good suggestion for that additional safety.

The grinder and cup wheel provides a superb clean end. Generally, it takes off different bumps and nobs that had been a part of the unique concrete casting. The round movement of the diamond cup wheel can generally be deceptive to the attention, making it look as if the floor is tough, however as you proceed, it disappears, and portray the concrete will depart no traces from the grinding challenge.

DIY challenge is completed as soon as all the pieces is clear and the challenge works because it ought to. For those who take away the paint from the concrete and you will paint the floor once more, cleansing and eradicating the mud is step one to getting ready the concrete for a brand new coat of paint. A stress washer is an efficient device, particularly for cleansing after you take away the paint with the grinder and cup wheel if you will repaint.


This is a hyperlink displaying the paint eliminated with a corded grinder and diamond cup wheel with a mud cowl.

Did you make this challenge?

Please depart a touch upon the weblog or share a photograph on Fb


YouTube/B.Ok. Williams: How you can Take away Paint from Concrete


The Spruce: How you can Take away Paint From Concrete