Proudly owning an airless or high-velocity low-pressure (HVLP) paint and stain sprayer lets you maintain your property, outbuildings, decks, fencing, and extra in high form year-round!
Paint sprayers are wonderful instruments, and so they’re far inexpensive than you may suppose. Whether or not you pay $150 for an entry-level HVLP sprayer, or $2500 for a cart-style airless sprayer, you’re going to wish to know easy methods to correctly clear your gear to maximise its lifespan and optimize its efficiency.
So, be a part of me on a quick, centered exploration about cleansing paint sprayers. After all, there are a number of sprayers available on the market, however all of them have related parts and carry out associated features.
Beneath are 5 sequential steps you could take, each time after utilizing your paint sprayer, to maintain it mechanically sound and searching sharp for years to come back.
Speak about thrilling – this undoubtedly is!
And we’re off!
Step-by-Step Directions for Cleansing Your Paint Sprayer
OK, so earlier than you start cleansing your paint sprayer, you’re going to wish to make sure that the entire stress is relieved from the unit. So, do that:
- Maintain the spray gun set off lock in and switch the facility swap off.
- Rotate the stress management knob to its lowest setting.
- Disengage the gun set off lock.
- Firmly maintain your gun’s spray tip right into a container.
- Have interaction the spray gun’s set off.
- Have interaction the gun set off lock.
- Rotate the priming valve to the prime or drainage place.
It will launch any stress from inside the unit. Subsequent, you’ll must flush out any paint, stain, or different coating medium left over within the sprayer and provide hose. Let’s check out easy methods to do it!
Purchase at Amazon | Purchase at Walmart
Flush Out the Leftover Coating Medium
While you use your paint sprayer for hours, after which shut it off on the finish of the workday, you’ll wish to drain the entire remaining paint from the unit and provide hose. High quality paint is dear and also you don’t wish to waste it.
So, have a clear container able to seize it in as you’re flushing your spray gun. For those who do a number of portray over the course of the 12 months, this could result in important financial savings.
Saved Cash = YES!
Right here’s easy methods to flush out the remaining coating medium, paint or one other kind:
- Take the tip guard and spray tip off of your spray gun.
- Take away the fluid consumption cap and drain tube from the paint reservoir.
- Use a clear, lint-free rag to wipe away any further paint.
- Place the fluid consumption tube into water or a specialty flushing fluid.
- Flip the priming valve to the “spray” place.
- Purpose your spray gun into your clear container.
- Have interaction your spray gun’s set off.
- Holding the set off in, flip the facility swap to the “ON” place.
- Enhance the stress management knob to its highest setting.
While you see that both water or flushing fluid begins to come back out, disengage the spray gun’s set off, and switch the facility off. Attempt to be fast about this since you don’t need water or flushing fluid diluting your paint that can be utilized once more.
Now, let’s take a look at easy methods to clear the sprayer pump out.
Clear the Sprayer’s Pump
Now that you’ve got the vast majority of the additional paint in a clear container, prepared for use once more, it’s time to flush out the remaining paint inside the pump and provide hose. You may lose a bit of little bit of paint right here, however not practically as a lot as you’d have for those who hadn’t taken the earlier steps.
Right here’s easy methods to flush the pump:
- Place the fluid consumption hose right into a container of water or flushing fluid.
- Place your spray gun over a flushing container.
- Have interaction the set off.
- Activate the facility.
- Proceed spraying till the fluid turns into clear.
- Flip the facility off.
Superior work! Now, let’s clear the tip guard, the spray tip, and the filters.
Oh the enjoyable!
Clear the Guard, Ideas, and Filters
It’s all the time good to scrub your spray tip, tip guard, and any filters in your unit when the paint remains to be in its most liquidic kind. The extra you let it start to dry, the more durable it’s to scrub successfully. And for those who let the paint dry till it’s hardened, it may be very troublesome to get off, which might harm the tip.
Personally, I depart my suggestions soaking in a Mason jar of mineral spirits. They’re all the time completely prepared to be used and all the time spotless!
Wipe all the pieces down with a clear rag with mineral spirits, the spray gun, hoses, wand, reservoir – all the pieces. Get it good and clear and dry, after which retailer it away safely in a spot the place it may well’t get chilly sufficient to freeze.
That’s it – you’re good to go!
My Closing Ideas About Tips on how to Clear a Paint Sprayer
Congratulations! You now know extra about cleansing a paint sprayer than a lot of the remainder of the world. Good for you!
Cleansing your paint sprayer after every use will assist to reclaim usable paint to reduce waste, lower your expenses, and considerably prolong the lifespan of your gear. In reality, I do know a couple of associates who’ve had the identical sprayers working completely for greater than 15 years.
Be Meticulous and Benefit from the Clear!
Sources:
